Genuine VW/Audi 7L6615123T Brake Caliper; Front Left – VW | 7L6615123D 7L6615123H 7L6615123M 7L6615123P

Original price was: $314.00.Current price is: $97.99.

Quality Meets Affordability

Online customer care, always here for you.

Control the delivery date and try to deliver it in the fastest time

Secure Payments, Secure Shopping

P/N: 7L6615123T Genuine VW/Audi

Description:

Front Left

Calliper

Touareg. Left. 17 inch rims. 330x32mm, from vin 7l5035001. 330x32mm, to vin 7l5035000.

Your part is located within diagram as #5.

Cross References:

7L6615123D
7L6615123H
7L6615123M
7L6615123P
VW7L6615123T

Brake calipers are the hydraulic clamps that create the friction needed to slow and stop VW models equipped with disc brakes. They function by using hydraulic fluid to force pistons inside the caliper to press brake pads on both sides of the brake rotor. The friction created by the brake pads pressing against the rotor slows the rotation of the rotor until it eventually stops turning. Every time you press on the brake pedal, hydraulic fluid is sent to the brake calipers for them to engage the pads.

Brake calipers are machined parts and are designed for the life of your VW. However, they do have seals and boots that can wear out and moisture can cause the calipers, caliper pistons, and brake bleeder screws to rust.

Replacing Your VW Brake Calipers

Replacing brake calipers requires the caliper to be disconnected from the brake hydraulic line and unbolted from the steering knuckle or wheel spindle.
Before bolting on a new brake caliper, it should be fitted with new brake pads and the brake rotor should be replaced.
Once the new brake caliper is bolted on the steering knuckle or wheel spindle and the brake hydraulic line is reconnected, the brake caliper and other calipers on the vehicle must be bled to remove all air from the brake hydraulic system.
The brake calipers can be bled by pumping the brake pedal and holding it pressed then loosening the bleeder screw on the caliper.
Once the bleeder screw is loosened, air will be forced out of the caliper being replaced by brake fluid and the brake pedal will drop to the floor.
Before releasing the brake pedal the bleeder screw must be tightened to prevent air from entering back into the caliper when the pedal is released.
This process must be repeated until no air comes out of the caliper and then repeated for each caliper to remove all air from the brake hydraulic system.

VW Brake Calipers.

Any Genuine brand part is obtained directly through our vehicle dealership network from your vehicle’s manufacturer. This is always your best option for getting the exact same part that is being replaced and will be the latest version design.

Left = Driver side and Right = Passenger side.

All parts are priced individually unless identified as a set or kit. “Per car” notes identify how many of a given part your car has and
“Left/Right or Front/Rear” notes means the part fits the left or right side of the car. These parts are still sold individually and you’ll
need to select the appropriate quantity if you plan to replace more than one of this item.